Growth and Atomic-Scale Characterization of Ultrathin Silica and Germania Films: The Crucial Role of the Metal Support

The present review reports on the preparation and atomic-scale characterization of the thinnest possible films of the glass-forming materials silica and germania. To this end state-of-the-art surface science techniques, in particular scanning probe microscopy, and density functional theory calculations have been employed. The investigated films range from monolayer to bilayer coverage where both, the crystalline and the amorphous films, contain characteristic XO₄ (X=Si,Ge) building blocks. A side-by-side comparison of silica and germania monolayer, zigzag phase and bilayer films supported on Mo(112), Ru(0001), Pt(111), and Au(111) leads to a more general comprehension of the network structure of glass former materials. This allows us to understand the crucial role of the metal support for the pathway from crystalline to amorphous ultrathin film growth.     

Synthesis and Single Crystal Structures of N-Substituted Benzamides and Their Chemoselective Selenation/Reduction Derivatives

A series of N-aryl-N-(2-oxo-2-arylethyl) benzamides and cinnamides has been prepared. The reaction of the benzamides with Woollins’ reagent, a highly efficient chemoselective selenation/reduction reagent, gave the corresponding N-aryl-N-(arylenethyl) benzoselenoamides in good yields. Five representative single crystal X-ray structures are discussed.     

Li8Si8, Li10Si9, and Li12Si10: Assemblies of Lithium-Silicon Aromatic Units

We report the global minima structures of Li₈Si₈, Li₁₀Si₉, and Li₁₂Si₁₀ systems, in which silicon moieties maintain structural and chemical bonding characteristics similar to those of their building blocks: the aromatic clusters T_d−Li₄Si₄ and C_2v−Li₆Si₅. Electron counting rules, chemical bonding analysis, and magnetic response properties verify the silicon unit‘s aromaticity persistence. This study demonstrates the feasibility of assembling silicon-based nanostructures from aromatics clusters as building blocks.     

Structure and electronic properties of hollow‐caged C60 fullerene‐derived (MN4)nC6(10 − n) (M = Zn,Mg, Fe,n = 1−6) complexes

Unique hollow‐caged (MN₄)_nC_{6(10 ? n)} (M = Zn, Mg, Fe, n = 1?6) complexes designed by introduction of n porphyrinoid fragments in C₆₀ fullerene structure were proposed and the atomic and electronic structures were calculated using LC‐DFT MPWB95 and M06 potentials and 6‐311G(d)/6‐31G(d) basis sets. The complexes were optimized using various symmetric configurations from the highest O_h to the lowest C₁ point groups in different spin states from S = 0 (singlet) to S = 7 (quindectet) for M = Fe to define energetically preferable atomic and electronic structures. Several metastable complexes were determined and the key role of the metal ions in stabilization of the atomic structure of the complexes was revealed. For Fe₆N₂₄C₂₄, the minimum energy was reported for C_2h, D_2h, and D_4h symmetry of pentet state S = 2, so the complex can be regarded as unique molecular magnet. It was found that the metal partial density of states determine the nature of HOMO and LUMO levels making the clusters promising catalysts. © 2014 Wiley Periodicals, Inc.     

Two Hexagonal Series of Lanthanoid(III) Oxide Fluoride Selenides: M6O2F8Se3 (M = La – Nd) and M2OF2Se (M = Nd,Sm, Gd – Ho)

Two hexagonal series of lanthanoid(III) oxide fluoride selenides with similar structure types can be obtained by the reaction of the components MF₃, M₂O₃, M, and Se in sealed niobium tubes at 850 °C using CsI as fluxing agent. The compounds with the lighter and larger representatives (M = La – Nd) occur with the formula M₆O₂F₈Se₃, whereas with the heavier and smaller ones (M = Nd, Sm, Gd – Ho) their composition is M₂OF₂Se. For both systems single‐crystal determinations were used in all cases. The compounds crystallize in the hexagonal crystal system (space group: P6₃/m) with lattice parameters of a = 1394–1331 pm and c = 403–372 pm (Z = 2 for M₆O₂F₈Se₃ and Z = 6 for M₂OF₂Se). The (M1)³⁺ cations show different square antiprismatic coordination spheres with or without an extra capping fluoride anion. All (M2)³⁺ cations exhibit a ninefold coordination environment shaped as tricapped trigonal prism. In both structure types the Se^2– anions are sixfold coordinated as trigonal prisms of M³⁺ cations, being first condensed by edges to generate trimeric units and then via faces to form strands running along [001]. The light anions reside either in threefold triangular or in fourfold tetrahedral cationic coordination. For charge compensation, both structures have to contain a certain amount of oxide besides fluoride anions. Since F^– and O^2– can not be distinguished by X‐ray diffraction, bond‐valence calculations were used to address the problem of their adjunction to the available crystallographic sites.     

Syntheses,Crystal Structures,and Properties of the Isotypic Pair [Cr(H2O)6]2[B12H12]3·15H2O and [In(H2O)6]2[B12H12]3·15H2O

Single crystals of [Cr(H₂O)₆]₂[B₁₂H₁₂]₃ · 15H₂O and [In(H₂O)₆]₂[B₁₂H₁₂]₃ · 15H₂O were obtained by reactions of aqueous solutions of the acid (H₃O)₂[B₁₂H₁₂] with chromium(III) hydroxide and indium metal shot, respectively. The title compounds crystallize isotypically in the trigonal system with space group R$\bar{3}$ c (a = 1157.62(3), c = 6730.48(9) pm for the chromium, a = 1171.71(3), c = 6740.04(9) pm for the indium compound, Z = 6). The arrangement of the quasi‐icosahedral [B₁₂H₁₂]^2– dianions can be considered as stacking of two times nine layers with the sequence …ABCCABBCA… and the metal trications arrange in a cubic closest packed …abc… stacking sequence. The metal trications are octahedrally coordinated by six water molecules of hydration, while another fifteen H₂O molecules fill up the structures as zeolitic crystal water or second‐sphere hydrating species. Between these free and the metal‐bonded water molecules, bridging hydrogen bonds are found. Furthermore, there is also evidence of hydrogen bonding between the anionic [B₁₂H₁₂]^2– clusters and the free zeolitic water molecules according to B–H^δ– ··· ^δ+H–O interactions. Vibrational spectroscopy studies prove the presence of these hydrogen bonds and also show slight distortions of the dodecahydro‐closo‐dodecaborate anions from their ideal icosahedral symmetry (I_h). Thermal decomposition studies for the example of [Cr(H₂O)₆]₂[B₁₂H₁₂]₃ · 15H₂O gave no hints for just a simple multi‐stepwise dehydration process.     

Two CdII/CoII‐Imidazolate Coordination Polymers: Syntheses,Crystal Structures,Stabilities, and Luminescent/Magnetic Properties

Cadmium(II) based 2D coordination polymer [Cd(L1)₂(DMF)₂] ( 1 ) (L1 = 4,5‐dicyano‐2‐methylimidazolate, DMF = N,N′‐dimethylformamide) and 2D cobalt(II)‐imidazolate framework [Co(L3)₄] ( 2 ) (L3 = 4,5‐diamide‐2‐ethoxyimidazolate) were synthesized under solvothermal reaction conditions. The materials were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction measurement (PXRD) and single‐crystal X‐ray diffraction. Compound 1 has hexacoordinate Cd^II ions and forms a zigzag chain‐like coordination polymer structure, whereas compound 2 exhibits a 2D square grid type structure. The thermal stability analysis reveals that 2 showed an exceptional thermal stability up to 360 °C. Also, 2 maintained its fully crystalline integrity in boiling water as confirmed by PXRD. The solid state luminescent property of 1 was not observed at room temperature. Compound 2 showed an independent high spin central Co^II atom.     

Micelle‐Triggered β‐Hairpin to α‐Helix Transition in a 14‐Residue Peptide from a Choline‐Binding Repeat of the Pneumococcal Autolysin LytA

Choline‐binding modules (CBMs) have a ββ‐solenoid structure composed of choline‐binding repeats (CBR), which consist of a β‐hairpin followed by a short linker. To find minimal peptides that are able to maintain the CBR native structure and to evaluate their remaining choline‐binding ability, we have analysed the third β‐hairpin of the CBM from the pneumococcal LytA autolysin. Circular dichroism and NMR data reveal that this peptide forms a highly stable native‐like β‐hairpin both in aqueous solution and in the presence of trifluoroethanol, but, strikingly, the peptide structure is a stable amphipathic α‐helix in both zwitterionic (dodecylphosphocholine) and anionic (sodium dodecylsulfate) detergent micelles, as well as in small unilamellar vesicles. This β‐hairpin to α‐helix conversion is reversible. Given that the β‐hairpin and α‐helix differ greatly in the distribution of hydrophobic and hydrophilic side chains, we propose that the amphipathicity is a requirement for a peptide structure to interact and to be stable in micelles or lipid vesicles. To our knowledge, this “chameleonic” behaviour is the only described case of a micelle‐induced structural transition between two ordered peptide structures.     

Glycosyl‐Templated Chiral Helix Stapling of Ethynylpyridine Oligomers by Alkene Metathesis between Inter‐Pitch Side Chains

Ethynylpyridine polymers and oligomers consisting of 4‐substituted pyridine rings linked by acetylene bonds at the 2‐ and 6‐positions have been investigated. Ethynylpyridine oligomers covalently linked with a glycosyl chiral template form chiral helical complexes by intramolecular hydrogen bonding, in which the chirality of the template is translated to the helix. With a view to fixation of the chiral architecture, D /L ‐galactosyl‐ and D /L ‐mannosyl‐linked ethynylpyridine oligomers have been developed with 4‐(3‐butenyloxy)pyridine units having alkene side chains. The helical structures are successfully stapled by alkene metathesis of the side chains. Subsequent removal of the chiral templates by acidolysis produces template‐free stapled oligomers. The chiral, template‐free, stapled oligomers show chiral helicity, which is resistant to polar solvents and heating.     

Ansa‐Bridged Bis(benzene) Titanium Complexes

Taking advantage of an improved synthesis of [Ti(η⁶‐C₆H₆)₂], we report here the first examples of ansa‐bridged bis(benzene) titanium complexes. Deprotonation of [Ti(η⁶‐C₆H₆)₂] with nBuLi in the presence of N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (pmdta) leads to the corresponding 1,1′‐dilithio salt [Ti(η⁶‐C₆H₅Li)₂] ? pmdta that enables the preparation of the first one‐ and two‐atom‐bridged complexes by simple salt metathesis. The ansa complexes were fully characterized (NMR spectroscopy, UV/Vis spectroscopy, elemental analysis, and X‐ray crystallography) and further studied electrochemically and computationally. Moreover, [Ti(η⁶‐C₆H₆)₂] is found to react with the Lewis base 1,3‐dimethylimidazole‐2‐ylidene (IMe) to give the bent sandwich complex [Ti(η⁶‐C₆H₆)₂(IMe)].